Technical Data; Mounting Of The Hood - hawa 6319-3010-00-01 Instructions De Montage

Technical Data

Torque specifications
The data specified in heading Mounting were determined once for the different types and represent binding values under optimum
conditions (e.g. straight application of thread-forming screws).
Make sure that all screws are tightened uniformly.
Recommended mounting tools:
- Torque tool 1 - 2 Nm
- Slotted and 7 mm wrench screwdrivers
- Scribing tips
- Center punch
- Metal punch Ø 5 mm
- Suitable deburring tool

Mounting of the Hood

1. Set the position
Observe interfering contours (e.g. internal door frame, frame widths, grounding studs etc.) of your enclosure. Mark the fixing
holes and the hood cut-out (compare order no.!) on the door(s) or side panels by means of the supplied drilling template.
2. Punch-mark attachment holes
3. Drill Ø 5 mm
Diese Zeichnung darf ohne unsere Genehmigung weder kopiert, noch vervielfältigt, noch Dritten zugänglich
gemacht werden. Zuwiderhandlungen verpflichten zu Schadenersatz und sind bei Vorsatz strafbar.
4. Deburr holes
6. Mount the hood holder tighten the cap nuts from the inside.
Torque: 2 Nm
Insert: 7 mm wrench
8. Place the hood above the hood holder either on the door or side
panel and slide it downwards
8
A
Zuschnitt: $raw
Material:
$mat
Oberfläche: $field4
Gewicht: $weight
Laserbearbeitung DIN EN ISO 9013-1
DIN ISO
Stanzen DIN 6930-2-m
5456-2
Biegen NF E 02-352-n
Allgemeintoleranz Schweißen EN ISO 13920-B
DIN ISO 2768-1-m Schweißvorgabe WPS DIN EN ISO 5817 - D
Benennung:
$ben2
5. Make and deburr the cut-out, protect it against corrosion
Art. Nr.: $ben1
Touch-up paint RAL 7035
$ident
Zeichn. Nr.:
Order No.: 3080-7035-12-00
Other colors available upon request.
7. Insert the exhaust filter in the cut-out, according to the mounting
instructions.
Optional captive locking device:
Bend the bracket outwards on both sides using a slotted screwdri-
ver so that the hood can no longer be pushed upwards
A = cut-out dimension
(see dimension table)
Example interfering
contours: door frame,
grounding stud
Kunde:
$aei3 $aet3 $aed3 $aeu3
$field1
$aei2 $aet2 $aed2 $aeu2
$aed1 $aeu1
$aei1 $aet1
Zust. Änderung Datum Name
Datum Name Ers. f. $replaces
erst. $created_at $created_by Ers. d. $replaced
bearb. $ changed_at $ changed_by Urspr. $source
gepr. $rel_at $rel_by $format Maßstab: Blatt $sheet
gen. $norm_at $norm_by $type $scale1 von $shcnt
$field3
häwa GmbH
Industriestraße 12
$version D-88489 Wain
Index: