Filter Exchange; Instructions For Inspection, Maintenance And Repair; Warranty; Service - hawa 6319-3010-00-01 Instructions De Montage

Filter Exchange

Attention! Make sure that the control cabinet is disconnected from the power supply and secure it against accidental unintentional
energizing.
1. Release optional locking device:
Bend the 2 brackets on the right and left side towards the inside
until the hood can be pushed upwards.
3. Exchange the filter pad according to the operating instructions of
the exhaust filter

Instructions for Inspection, Maintenance and Repair

Please check, if necessary as part of the revision specified by the operator, at least once a year:
- The perfect condition and cleanliness of the filter pads.
- The product for damages, tight fit and proper function.
- The seals for damages and gap-free fit.
- The surface finish for damages.
- The perfect condition of the attachment.
Exchange damaged parts and use original häwa parts only.
When purchasing spare parts, please state the product code or the spare part code to ensure identification.

Warranty

These instructions are subject to our General Terms and Conditions: https://www.haewa.de/company/imprint.html
We do not accept liability for printing errors.

Service

You will find the location of the sales office responsible for your area on the last page.
Service phone number: Tel. +49 7353 98460
2. Slide the hood upwards and remove it
4. Slide the hood onto the hood holder and, if necessary, reset the
captive locking device as described above.
Airflow
Stiff side
9