KitchenAid KSMSSA Manuel D'utilisation page 5

USING THE SAUSAGE STUFFER ATTACHMENT
ASSEMBLING THE SAUSAGE STUFFER ATTACHMENT TO STAND MIXER
1
2
3
4
USING THE SAUSAGE STUFFER
Always use food pusher.
Keep fingers out of openings.
Keep away from children.
Failure to do so can result in amputation or cuts.
1
Turn the Stand Mixer off and unplug.
For Stand Mixers with a hinged attachment hub
cover: Flip up to open.
For Stand Mixers with a removable attachment hub
cover: Turn the attachment knob counterclockwise to
remove attachment hub cover.
Insert the attachment shaft housing into the
attachment hub, making certain the power shaft fits
into the square hub socket. If necessary, rotate the
attachment back and forth. The pin on the attachment
housing will fit into the notch of the hub rim when in
the proper position.
Tighten the Stand Mixer attachment hub knob
clockwise until the attachment is completely
secured to the Stand Mixer.
WARNING
Rotating Blade Hazard
Feed ground meat into the Food Grinder attachment
before sliding the casing on the Sausage Stuffer tube.
This will eliminate air pockets.
USING THE SAUSAGE STUFFER ATTACHMENT | 5