NEFF Mega 4624 N B1624N0/04 Instructions De Montage page 4

Assembly Instructions
For the installer
and kitchen expert!
Important installation
notes
4
Properly dispose of packaging materials.
Do not use oven door handle for
transporting or handling the unit during
installation.
An earthed socket is required for the power
supply.
If the earthed socket is no longer accessible
following installation of the oven, a disconnecting
device must be fitted as described below in the
section on "Electrical safety".
The built-in oven is supplied with a connecting
cable.
WARNING: Connection and first start of the
appliance may only be performed by an
authorised specialist.
Connection have be made using a mains
connection cable not lighter than H05RR-F
300V / 500V Rubber Flexible Cable or H05VV-F
300V / 500V PVC Flexible Cable.
Rated consumption, rated voltage and type
no. of the appliance:
See appliance nameplate behind the oven door
to the left beneath the side edge of the oven.
The unit's nameplate is located at on the
sidewall of the unit.
Electrical safety of the appliance can be ensured
only if the equipment earth in the building
installation has been installed according to
regulations.
A separator must be installed in the household
circuit. A suitable separator is a switch that has a
contact gap of more than 3 mm and interrupts all
poles. Other examples are LS switches, fuses
and contactors.