Restarting; Firmware Update - Venta AirSense ECO Notice D'emploi

ENGLISH

Restarting

Press and hold the Reset button on the back
of the device for approx. 5 seconds until the
LED strip shows orange:
The device has now been reset to the factory
settings and is in hotspot mode (see section
Hotspot mode).
5 s
Note: Each time the device is restarted, the
locally stored data is deleted.

Firmware update

Two blue chaser lights run from the micro
USB connector along the LED strip to the
other side of the device. When updates are
available, firmware updates take place auto-
matically.
19