Gemini PS-626EFX Manuel D'instructions page 4

INTRODUCTION:
Congratulations on your purchase of Gemini PS-626EFX 10" 3 channel
stereo mixer. This-state-of-the-art mixer features the latest technological
advances and is backed by a 1 year warranty, excluding the cross fader.
The cross fader is backed by a separate 90 day warranty.
Prior to use we suggest that you carefully read all the instructions.
FEATURES:
- 10" 3 Stereo channel mixer
- 6 line, 2 Phono
- 3 band rotary line EQ with cut feature & rotary gain channel control
- Sperate Cue Switch for each channel
- Rotary cue volume, CUE/PGM rotary knob
- VU meter
- 3 effects with parameter control
- Removable face plate for user replaceable Rail Glide cross fader
PRECAUTIONS:
1. All instructions should be read before using this equipment.
2. To reduce the risk of electrical shock, do not open the unit.
Please refer all servicing needs to a Gemini-qualified service
technician.
3. Do not expose this unit to direct sunlight or a heat source such
as a radiator or stove.
4. This unit should be cleaned only with a damp cloth. Avoid sol-
vents or other cleaning detergents.
5. When moving this equipment it should be placed in its original
carton and packaging. This will reduce the risk of damage during
transit.
6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
7. DO NOT USE SPRAY CLEANERS OR LUBRICANTS ON
CONTROLS, SURFACES OR SWITCHES.
IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL GEMINI CUSTOMER SERVICE AT:
1 (732) 346-0061. DO NOT ATTEMPT TO RETURN THIS EQUIPMENT TO YOUR DEALER.
CONNECTIONS:
Ensure that the POWER SWITCH
1
is in the OFF position prior to making any connections.
POWER SUPPLY
2
This unit comes with a POWER SUPPLY. Plug in to the rear panel
POWER SUPPLY socket before plugging it in to a proper power
source.
The MASTER RCA OUTPUT
3
connects the mixer to your main amplifier using standard audio ca-
bles with RCA-type connectors.
The RECORD RCA OUTPUT
4
The RECORD output jacks can be used to connect the mixer to the
record input of your recording unit, thus enabling you to record your
mix with RCA cables.
CONVERTIBLE PHONO/LINE INPUTS
5
The PS-626EFX has 2 CONVERTIBLE PHONO/LINE (PH/LN) RCA
INPUTS These small switches which are located to the right of the
RCA inputs for channels 1 and 2 allow you to choose between a
PHONO (Turntable) input or a LINE level (Mp3, CD, Tape player
etc..).and require the proper switching. When switched to the PH
position you may use any Turntable with a magnetic cartridge, re-
member to connect your ground wire (see GROUNDING SCREW)
or there may be a system hum.
CHANNEL INPUTS
6
Now you may plug the RCA's from your playable medium into each
input to be connected to their respective CHANNELS (CH).
NOTE: CONNECTING A LINE LEVEL DEVICE TO A PH INPUT MAY CAUSE THAT
MIXER CHANNEL TO OVERLOAD AND OR DISTORT.
GROUNDING SCREW
7
When using a turntable(s), you will need to ground the RCA
cable(s) by screwing in the grounding fork(s) to the GROUNDING
SCREW located on the rear panel of the PS-626EFX mixer.
MIC (MICROPHONE) INPUT
8
The main MIC or Microphone input is located in back right hand
corner of the PS-626EFX and will accept a standard 1/4" connector.
You can control the gain and even set the low's and the high's for the
mic (See CONTROLS ).
HEADPHONE OUTPUT
9
The HEADPHONE OUTPUT located at the front of the PS-626EFX
will accept any headphone with a standard 1/4" connector and or
adapter and will allow you to CUE your music program before you
play it, you can adjust the volume and PGM mix of the HEADPHONE
(see CONTROLS).
Then when all of your connections have been made turn on the
mixer by pressing the POWER SWITCH.
CONTROLS:
MICROPHONE VOLUME
10
Allows you to adjust the volume of the microphone signal.
MICROPHONE EQ
11
The MICROPHONE EQ Let's you to control the low frequency and
the high frequency of the microphone signal.
MIXER CHANNEL
(NOTE: ALL 3 CHANNELS HAVE THE SAME FEATURES)
CHANNEL INPUT SELECTOR
12
The CHANNEL INPUT SELECTOR switches allow you to choose
which input will be controlled by that channels corresponding
volume FADER.
For example on CHANNEL (1) the INPUT SELECTOR allows you to
choose between PHONO 1/LINE 1 and LINE 2 , and also on CHAN-
NEL (2) the INPUT SELECTOR SWITCH will let you choose be-
tween PHONO 2/LINE 3 and LINE 4 and on CHANNEL (3) you can
choose between LINE 5 and LINE 6 input.
CHANNEL ROTARY GAIN
13
The CHANNEL ROTARY GAIN allows you to boost the signal of
each individual channel depending on how low or high
its input level is.
3 BAND EQUALIZER
14
The 3 BAND EQUALIZER adjust the tone of each CHANNEL by giv-
ing you a choice 3 frequencies (BANDS) to adjust , from LOW,
MIDRANGE (MID) and HIGH's ,you can use the adjustment knobs to
higher or lower the 3 separate frequencies till the sound of the music
program is appropriate for your listening environment.
CHANNEL VOLUME FADER
15
After you have chosen which input you will use with the INPUT SE-
LECTOR the corresponding CHANNEL FADER will allow you to ad-
just the volume for that particular CHANNEL.
PS-626EFX
4