Panasonic TC-L26X1 Manuel D'utilisation page 53

If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model
number and serial number (both found on the rear of the TV).
Problem
Some spots remain
bright or dark
Chaotic image, noisy
No image can be
displayed
Only spots are displayed
instead of images
Neither image nor
sound is produced
Black Box appears
No sound is produced
Sound is unusual
Unknown sound heard
1- Sounds from TV
cabinet
2- Tick/Click sound
3- Buzzing sound
The main unit is hot.
Actions
The LCD panel is made up of a few million pixels and is
produced with advanced technology through an intricate
process. Sometimes a few pixels may be bright or dark.
These pixels do not indicate a defective panel and will
have no impact on the performance of the TV.
Check nearby electrical products
(car or motorcycle ignition systems, fluorescent lamp, etc.)
Check Picture menu (p. 28)
Check the cable connections.
Check that the correct input has been selected.
Check the channel settings. (p. 40)
Check the antenna cables.
Is the power cord plugged into the outlet?
Is the TV unit turned On?
Check Picture menu (p. 28) and volume.
Check the AV cable connections. (p. 10-13)
Check that the correct input has been selected. (p. 22)
Change settings of Closed caption (CC). (p. 42)
Are the speakers' cables connected correctly? (p. 45)
Is "Sound Mute" active? (p. 14)
Is the volume set to the minimum?
Is "TV speakers" set to "Off"? (p. 28)
Change "SAP" settings. (p. 17)
Check "HDMI 1 in", "HDMI 2 in" or "HDMI 3 in"* settings.
* HDMI 3 in (TC-L37X1, TC-L32X1 only) (p. 28)
Set "SAP" setting to "Stereo" or "Mono".
Check the HDMI device connected to the unit.
Set the audio setting of the HDMI device to
"Linear PCM".
If digital sound connection has a problem,
select analog sound connection.
1- Changes in the temperature and humidity of the room may cause
the TV's cabinet to expand or contract and produce metallic
sounds. This is not a sign of faulty operation or a malfunction.
2- When the TV is powered on, an electrical component in the TV
activates producing a tick/click sound. This is not a sign of faulty
operation or a malfunction.
3- Electrical circuits are active while the TV set is on.
This is not a sign of faulty operation or a malfunction.
The main unit radiates heat and some of the parts may
become hot. This is not a problem for performance or
quality.
Set up in a location with good ventilation.
Do not cover the ventilation holes of the TV with a
tablecloth, etc., and do not place on top of other equipment.
53