Displaying Pc Screen On Tv - Panasonic TC-L26X1 Manuel D'utilisation

Displaying PC Screen on TV

The screen of the PC connected to the unit can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 45)
■
PC menu setting
Making settings
Menu
PC
adjustments
Audio menu (p. 28)
24
Display the Input select menu
Select "PC"
■
To return to TV
(change as desired)
"How to Use Menu Functions"
Item
Reset to defaults Resets PC adjust
H & V:
Sync
On green: Uses a synchronized signal on the Video G signal, which is input from the G
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is
Dot clock
blurred.
Adjusts the horizontal position.
H-position
Adjusts the vertical position.
V-position
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the
Clock Phase so that a clear picture appears.
Clock phase
Note
It may not be possible to display a clear picture due to poor input signals.
Switches to wide display.
Input
Input signal switched from 640×480 to 800×480
resolution
Input signal switched from 1024×768 to 1280×768 or 1366×768
Displays the H (Horizontal)/V (Vertical) frequencies.
Display range
H-frequency
V-frequency
Horizontal: 15 - 110 kHz
Vertical:
Input select
TV
1
Component AUX
2
HDMI 1 GAME
3
HDMI 2
4
HDMI 3 GAME
5
Video 1
6
Video 2 GAME
7
PC
8
(example: TC-L37X1)
PC
/
to (p. 28)
Adjustments/Configurations (options)
The H and V sync signals are input from the HD/VD connector. (p. 50)
connector. (p. 50)
48 - 120 Hz
Corresponding signals
(p. 50)
Displays
PC screen