Fm Reception With Rds Information; Automatic Station Scan; Manual Station Scan - TechniSat DIGITRADIO CD 2GO Mode D'emploi

6.2 FM reception with RDS information

RDS is a procedure for broadcasting additional information via FM
stations. Broadcasters with RDS broadcast their station name or the
programme type, for example. This is shown on the display. The device
can show the RDS information RT (Radio text), PS (Station name), PTY
(Programme type).

6.3 Automatic station scan

> In order to perform a complete scan, press the STOP/SEARCH
button (3).
If an FM station with sufficient signal intensity is found, the scan
stops and the station is played. If an RDS station is being received,
the station name appears and, possibly, radio text.
Please use the manual station scan for setting weaker stations.

6.4 Manual station scan

> Briefly press the UP or DOWN buttons repeatedly to set the
desired station or frequency.
The display shows the frequency in steps of 0.05 MHz.
72