General Device Functions; Switching On The Device; Switching Off The Device; Source Selection - TechniSat DIGITRADIO CD 2GO Mode D'emploi

4.4 General device functions

4.4.1 Switching on the device

> Press the ON/OFF button (11) to switch the DIGITRADIO CD 2GO
on.
After switching on for the first time, the device automatically
performs a complete scan in DAB mode. While scanning, the
display information shows the progress, as well as the number of
digital radio stations detected. After completing the station scan
the first DAB+ channel is played.

4.4.2 Switching off the device

> Hold the ON/OFF button down for at least 5 seconds to switch
the device off again.

4.4.3 Source selection

> Press the MODE button to switch between the DAB+ (Digital
Radio), FM and CD sources.
If you are in CD mode, you will need to briefly hold down the
MODE button (if there is a CD in the drive).
DE
EN
FR
NL
65