5.1.6 Manual station scan
>
Briefly press the MENU button, use the UP or DOWN buttons to
select the [Set manually] item and press the OK button.
>
Use the UP or DOWN and OK buttons to select a channel (5A to
13F). The signal intensity will now be shown on the display. If a
DAB+ station is being received on a channel, the station ensemble
name is displayed. The antenna can now be aligned to the
maximum signal intensity.
Stations with a signal intensity below the required minimum
signal intensity are not transmitting a strong enough signal.
5.1.7 Volume adjustment (DRC)
The Volume Adjustment menu item is used to set the compression rate,
which compensates for dynamic fluctuations and the associated volume
variations.
>
Hold down the MENU button and use the UP or DOWN buttons to
select the [Volume Adjustment] item.
>
Press the OK button.
>
Select the compression rate using UP or DOWN:
high -
low -
off -
>
Confirm by pressing the OK button.
70
High compression
Low compression
Compression switched off.