Product Information; How It Works; Versions; Technical Specification - RK Rose+Krieger RKSlimlift Notice D'assemblage

6.1 How it works

The RKSlimlift lifting column is used to adjust the height of tables or other setting tasks of a
similar kind. It is driven by a low voltage motor.

6.1.1 Versions

The lifting column is available in different versions. The versions differ in the geometry of the ex-
ternal section (eclipse/basic), lifting power and speed. For more precise details, please refer to the
technical specification table (Chapter 6.2).
•
After receiving this lifting column, check the device for possible damage and missing components.
•
Notify RK Rose+Krieger GmbH of any faults found immediately.

6.2 Technical specification

Type/Model
Footprint
Height
Lift
Weight
Supply voltage
Type of protection
Lifting speed
Duty cycle
Permanent noise level
max. current drain (primary)
max. power consumption
Ambient temperature
max. compressive/tensile force
Torque loading (dynamic)
Bracing moment (static)
Electrical connection
RK lift
Slim
285 mm and 460 mm
(see maker's plate)
4.5 kg - 7 kg
36V DC
With entire surface and cover
without drilled holes, the stand
and application surfaces achieve
the protection class IP 30.
8 mm/s and 32 mm
(see maker's plate)
15% for 10 minutes
(1.5 minutes operation/8.5 minu-
tes pause)
< 60 dB(A)
up to 4.0A at V = 36V DC
144 W
1000 N to 4000 N
(see maker's plate)
DIN plug, 8-pin
RK lift cont-
(only for Slim
rollers
)

6. Product information

RK
Slim
Ø 93 mm
610 mm (retracted)
390 mm
+5°C to +40°C
Mmax. 100 Nm
Mmax. 200 Nm
lift manual
4.5 kg
1000 N
31