Functional Overview Of The Operating Elements - MAXXMEE 09814200100 Mode D'emploi

Digital Air Purifi er
NOTICE – Risk of Damage to
Material and Property from Batteries
■
Use only the battery type specifi ed in
the technical data.
■
Take the battery out of the remote
control when it is dead or if you will
not be using the remote control for
a prolonged period. This will prevent
any damage caused by leaks.
■
Do not use the remote control if a
battery has leaked. Remove a leaking
battery from the device immediately.
FUNCTIONAL OVERVIEW
OF THE OPERATING
ELEMENTS
Touch the relevant fi eld to activate or
deactivate the individual function.
The control lamps above the individual
operating elements indicate which func-
tions are active.
Control panel
ON / OFF (12)
Switching the device on / off
AUTO (13)
Activating / Deactivating the AUTO mode
When this function is active, the device
measures the air quality via the sensor
(10) and automatically selects a suitable
setting.
Please Note: In the AUTO mode the
speed level cannot be adjusted manually.
SPEED (14)
Setting the speed level
The fan of the device has 3 speed levels.
You can set them by repeatedly touching
the SPEED fi eld. The level can be identi-
fi ed in the display (16) by the number of
bars (2 bars - 5 bars - 8 bars). In addition,
the fan symbol in the display rotates fast-
er the higher the level is.
09814_Inlay_DE-EN-FR-NL_A5_V1.indb 13 09814_Inlay_DE-EN-FR-NL_A5_V1.indb 13
ION (15)
Activating / deactivating the ionisation
If this function is active, negatively
charged ions which bind dirt particles
from the air are released.
RESET (17)
Reset the reminder for changing the
combination fi lter
If the combination fi lter has been
changed, touch this fi eld to reset the
change reminder.
TIMER (18)
Activating / setting / deactivating the timer
The device has an 8-hour timer. You can
adjust this by repeatedly touching the
TIMER fi eld (1 to 8 – Off). When the timer
is active, the setting appears alternately
with the current room temperature on the
display (16).
SLEEP (19)
Activating / deactivating the night mode
When this function is active, the display
turns off except for the SLEEP symbol.
The fan runs at the lowest speed level.
CHILD LOCK (20)
Activating / deactivating the child lock
When this function is active, all operating
elements are locked. If a fi eld is touched
nevertheless, three warning tones will
sound.
Touch the fi eld to activate the function
and press it for about 5 seconds to deac-
tivate it.
Remote control
The buttons on the remote control (Fig.
D) correspond to the functions of the
operating elements on the control panel
(1). Only the ionisation and sterilisation
functions on the remote control are
divided into two individual buttons (Ion +
Sterilize).
EN
13
31.07.2020 08:58:57 31.07.2020 08:58:57