Antari DarkFX Spot 670 Mode D'emploi page 7

fixture in the chain with DMX input of the next fixture.
Physical Installation
Use supplied mounting bracket or rigging clamp to install fixture.
․
Make sure installation location, fastening connecting, and rigging hardware can hold at
․
least 10 times the weight of the fixture.
Make sure no combustible or flammable material nearby.
․
Secure each fixture with an approved safety cable that can hold at least 10 times the
․
weight of fixture.
Make sure fixture installed in a well ventilated area.
․
Consider lamp replacement and routine maintenance access when selecting
․
installation location
Adjustable Mounting Bracket
Adjust mounting bracket by loosening gear screw, set the fixture to desire angle and tighten
the gear screw to finish adjustment. Illustration below demonstrates how to adjust mounting
bracket.
Important
.
7