Service And Maintenance - Antari DarkFX Spot 670 Mode D'emploi

DMX Address Setting
Assign DMX address manually when fixture needs to be assign to specific address or use
with other fixture.
Press "MENU" button to find DMX Mode menu, press "ENTER" to enter submenu.
i.
Use "UP" or "DOWN" button to find DMX Address menu, press "ENTER" to edit
ii.
Use "UP" or "DOWN" button to set DMX address from 001 to 512. Press "ENTER" to
iii.
store setting.
DMX Channels
Set desire DMX control channel mode to gain require control function when control fixture
by DMX desk.
Press "MENU" button to find DMX Mode menu, press "ENTER" to enter submenu.
i.
Use "UP" or "DOWN" button to find DMX Channels menu, press "ENTER" to edit
ii.
Use "UP" or "DOWN" button to set DMX Channel mode 01 or 02. Press "ENTER" to
iii.
store setting.
DMX Channel Function
Channel Mode
1
2

Service and Maintenance

Important! Smoke fluid residue, dust and any excessive particle residue will
degrade product performance, cause overheating and damage fixture. Damages
caused by inadequate cleaning or maintenance are not covered by product
Cleaning
․
Unplug fixture from AC power before starting.
Channel
1 Dimmer
1 Dimmer
2 Strobe
warranty.
Value
0-255
0-255
0-5
6-255
10
Function
Dimmer 0-100%
Dimmer 0-100%
Off
1-20Hz