Setting Up The Appliance Safely; Mains Connection - Micromaxx MD 16054 Mode D'emploi

perature.
• Only allow a specialist workshop or our Service Centre to re-
pair the appliance or mains lead. The user may be subject to
serious risks if repairs are not carried out by a qualified per-
son.

3.3. Setting up the appliance safely

• Place the appliance on a heat-resistant, dry and level surface.
• Do not place the appliance on surfaces that can become hot
(e.g. on hotplates).
• CAUTION! Ensure that the appliance does not come into con-
tact with any other objects during operation. Leave sufficient
clearance at all sides and to the top. Especially, do not set
up the appliance near easily flammable materials (curtains,
drapes, paper, etc.). There is a risk of fire.
• Do not cover the appliance.
• CAUTION! Do not allow moisture to penetrate the casing.
There is a risk of electric shock.
• Do not place any objects on the appliance.
• Do not set up the appliance near to sinks and avoid exposing
it to water droplets or spray.
• Never place the appliance on the edge of a table – it could tip
over and fall.

3.4. Mains connection

• Only connect the appliance to a properly installed 220-
240V~50 Hz safety socket that is easy to reach and close to
the working area. Keep the mains safety socket free of ob-
structions so that the plug can be pulled out easily.
• Remove the plug from the mains safety socket after each use,
before cleaning and during periods when the appliance is left
unattended.
• When disconnecting the appliance from the mains safety
socket, always pull on the plug rather than on the mains ca-
DE
FR
NL
EN
81 of 96