Before First Use; Inserting The Grilling Plates; Removing The Grilling Plates; Using The Contact Grill - Micromaxx MD 16054 Mode D'emploi

6. Before fi rst use
 Remove all packaging materials.
 Set up the appliance on a level, dry and heat-resistant work surface at a comfort-
able height.
 Clean the grilling plates with a slightly damp, soft cloth before using the appli-
ance for the first time, as well as after ever subsequent use. Thoroughly dry the
grilling plates.

6.1. Inserting the grilling plates

 Firstly insert the lower grilling plate onto the lower heating element and then
the upper grilling plate onto the upper heating element.
 Insert each of the grilling plates into the appliance in such a way that the tabs on
the appliance fit into the slots on the grilling plates.
 Press down on the grilling plates until they audibly click into place.
The appliance is now ready for use.

6.2. Removing the grilling plates

 Press the relevant unlocking button on the right-hand side of the appliance to
release the upper and lower grilling plates.
 Hold the upper grilling plate firmly when removing it so that it does not fall
down out of the appliance.

7. Using the contact grill

 Prepare the food in accordance with the recipe.
 Insert the grilling plates as described above.
 Close the lid and insert the mains plug into a 220-240V~ 50 Hz mains safety
socket.
 Set the On/Off switch to the ON position.
The red operating light will light up to indicate that the appliance is in use.
 Set the desired temperature level (the MAX setting corresponds to the highest
temperature level, the MIN setting to the lowest).
WARNING!
The touchable surfaces of the appliance will become
hot during operation. Only touch the appliance on
the handle or the temperature control during opera-
tion. Use oven gloves for this purpose. There is a risk
of burns!
DE
FR
NL
EN
85 of 96