GE GPE12 Serie Manuel D'utilisation Et Instructions D'installation page 13

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TRANSFER TOP HINGE TO
7
THE LEFT
masking tape, remove the screw cover on the
left. Be careful of the paint finish.
Reinstall the screw cover on the right side.
TRANSFER FREEZER DOOR
8
STOP TO THE LEFT
WARNING
instructions, leaving off parts, or overtightening
screws, can lead to the door falling off and result
in injury and property damage.
Remove the door stop and hinge pin sleeve
from the bottom of the right side of the door.
that came with your refrigerator, transfer the
hinge pin sleeve to the left side and install the
left door stop.
(Right Side)
49-60749-2
Installation Instructions
(Left Side)
REHANG THE FREEZER
9
DOOR
Transfer the screw cover on top of the door to
the opposite side.
Screw Cover
Make sure the washer (if applicable) is in place
on the center hinge over the pin. Assure the
that the gasket seals on all sides.
Attach the top hinge removed earlier on the left
side of your refrigerator and replace the hinge
cover
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gpe12

Table des Matières