Cleaning And Maintenance; Technical Specification - Bionaire BT18 Manuel D'utilisation

Base/Cord Assembly (for both BT18/BT19)
P. Fan housing
Q. Rear base
R. Front base
S. Screw (4)
T. Power cord
U. Crosshead screws (2)
V. Cord clamp
MISSING A PART FOR YOUR FAN?
Please call 0800 052 3615 for assistance.
ASSEMBLY INSTRUCTIONS (See Fig.
7 & 8)
1. Assemble Base (Q,R) to Fan Housing (P)
making sure the cord is enclosed between
base (Q,R). Secure together with 4 screws
(S). Refer to Fig.7 for proper alignment of
assembled Base to Fan
Housing.
2. Secure Power Cord (T) to bottom of Base
(Q,R) using the Cord Clamp (V) with 2
crosshead screws (U). Refer to Fig.8.
OPERATING INSTRUCTIONS (See Fig. 2, 4, 5,
6) BT18-
To turn on unit (continuos use):
1. Plug in unit
2. Turn timer (B) to I (ON)
3. Select speed setting button 1 (Low), 2
(Med), 3 (High) (A).
To turn unit OFF:
Select Speed Button
Timer (B) to
To use Timer Control:
Select a Speed Button (A) 1, 2 or 3 and turn
Timer (B) to desired time
(up to 120 minutes)
To use Oscillation Control:
Press (C) = Oscillation On, Off
BT19-
Remote Control:
Remote Control requires 2 AAA batteries for
operation. There is a slot on the back of the unit
(Refer to Fig. 6) to store the remote when not in
use.
To turn unit ON (continuos use):
(A) (OFF) or turn
(OFF)
Press (E)- Select a speed 1 (Low), 2 (Med),
3 (High) shown by the Speed Indicator lights (D).
Ref. to Fig.4.
To turn unit OFF:
Press (E)
To use Timer Control:
Press (K) select desired time for Power to turn
OFF in 1, 2, 4, 8 hours shown by the Timer
Indicator lights (J). Ref. to Fig.4.
To use Oscillation Control:
Press (I) = Oscillation On, Off To use
Breeze/Sleep Modes:
Press (F) Select Natural Breeze or
Sleep Breeze shown by the Indicator lights (G).
• Natural Breeze Mode
through the fan speed settings from High,
Medium, Low & OFF to simulate a natural
breeze until the user turns the unit OFF.
• Sleep Breeze Mode
cycle through the fan speed settings, starting
at High for 3 hours, then Medium for 2 hours,
then on Low until user turns the unit OFF.

CLEANING AND MAINTENANCE

• Always unplug the fan before cleaning or
assembly.
• Clean the fan with a soft cloth moistened with
a mild soap solution.
• DO NOT allow water to drip on or into the fan
motor housing.
• DO NOT open the unit for cleaning. The
manufacturer reserves the right to change or
modify any specifications without notice.

TECHNICAL SPECIFICATION

For all Technical and Regulatory information with
regards to your product specifications under
Eco-Design Regulation No 206/2012, please
contact the manufacturer. Full details including
fan flow rate, fan power input, standby power
and max air velocity of your Bionaire™ Fan can
be provided. Please contact our consumer help
line.
GUARANTEE
Please keep your receipt as this will be required
for any claims under this guarantee.
This appliance is guaranteed for 3 years after
your purchase as described in this document.
2
will randomly cycle
will automatically