Before First Use - Ninja Auto-iQ BL490 Serie Instructions

Before First Use

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the blade assembly
in first.
IMPORTANT: Blade Assemblies are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
11 1-877-646-5288
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If using the pour spout,
ensure the lid is fully
locked onto the pitcher.
Failure to do so will result
in a risk of laceration.
WARNING:
Stacked Blade
Assembly is sharp
and not locked in
place. If pouring
with the lid removed,
carefully remove
the Stacked Blade
Assembly first, holding it by the shaft. Failure to
do so will result in a risk of laceration.
CAUTION: Do not immerse the motor base into
water or any other liquid.
1
Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2
Wash the lids, pitcher, Nutri Ninja
Steel Ninja Cup and blade assemblies in warm, soapy
water. When washing the blade assemblies, use a
dish-washing utensil with a handle to avoid direct hand
contact with blades.
CAUTION: Handle the blade assemblies with care
when washing, as the blades are very sharp.
3
Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 The pitcher, Nutri Ninja
lids, and blade assemblies, are all dishwasher safe. It
is recommended that the lids and blade assemblies
be placed on the top rack. Ensure that the blade
assemblies are removed from the containers before
placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
cup, Stainless
®
cup, Stainless Steel Ninja Cup,
®