Intended Use - Dometic CFX3 Serie Guide Rapide

Masquer les pouces Voir aussi pour CFX3 Serie:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
CFX3
• Only connect the cooling device as follows:
– With the DC connection cable to a DC power supply in the vehicle
– Or with the AC connection cable to an AC power supply
• Never pull the plug out of the socket by the cable.
• If the cooling device is connected to a DC outlet, disconnect the cooling device and
other power consuming devices from the battery before connecting a quick
charging device.
• If the cooling device is connected to a DC outlet, disconnect the cooling device or
switch it off when you turn off the engine. Otherwise you may discharge the battery.
• The cooling device is not suitable for transporting caustic materials or materials con-
taining solvents.
• The insulation of the cooling device contains flammable cyclopentane and requires
special disposal procedures. Deliver the cooling device at the end of its life-cycle to
an appropriate recycling center.
• Do not use electrical devices inside the cooling device unless they are recommended
by the manufacturer for the purpose.
• Do not place the cooling device near naked flames or other heat sources (heaters,
direct sunlight, gas ovens etc.).
• Risk of overheating!
Ensure at all times that there is a minimum of 50 mm ventilation on all four sides of the
cooling device. Keep the ventilation area free of any objects that could restrict the air
flow to the cooling components.
Do not place the cooling device in closed compartments or areas with none or mini-
mal air flow.
• Ensure that the ventilation openings are not covered.
• Do not fill the inner container with ice or fluids.
• Never immerse the cooling device in water.
• Protect the cooling device and cables against heat and moisture.
• The device shall not to be exposed to rain.
2

Intended use

The cooling device is suitable for cooling food. The cooling device is suitable for use in vehicles or on boats.
The cooling device is designed to be operated from a DC on-board power supply of a vehicle or boat, a DC auxil-
iary battery or from an AC power supply.
The cooling device is suitable for camping use.
The cooling device is intended to be used in household and similar applications such as
• Staff kitchen areas in shops, offices and other working environments
• Farm houses
• Clients in hotels, motels and other residential type environments
• Bed and breakfast type environments
• Catering and similar non-retail applications
This product is only suitable for the intended purpose and application in accordance with these instructions.
EN
Intended use
15

Publicité

Table des Matières
loading

Table des Matières