Spray Tips - Powerwerx POWERPLAY HOTROD 2500 Mode D'emploi

Your POWERPLAY™ pressure washer has multiple attachments. Pressure washers operate on
pressure (PSI) and volume of water (GPM) that is supplied to the soiled area that requires cleaning.
Depending on the job, you can select from different quick-change tips. Pressure tips range from 0°,
15°, 25°, 40° and low-pressure/high-volume soap.
Each tip is intended for a different application. Please see the following for recommended uses to
achieve the best performance for your pressure washer:
• Low-Pressure/High-Volume Soap Tip (black) - used with the soap tank for injection of soap or
cleaner for pre-cleaning, wax application or high volume waterflow, where higher than garden
hose pressure (55psi) is required, but will not damage delicate objects such as freshly painted
or delicate surfaces.
• For delicate rinse (higher volume and lower pressure) the white 40° tip is recommended. This
tip will be a good choice for the gentle cleaning of cars/trucks, boats, RV's, patio furniture,
lawn equipment, etc.
• For general rinsing and washing, (medium volume and medium pressure) the 15° or 25° yellow
or green tips are recommended. This is ideal for most all-purpose cleaning jobs, such as home
siding, brick patios, wood decks, driveways, sidewalks, etc.
• For maximum cleaning, (maximum pressure, reduced flow) the 0° red tip is recommend. This
is ideal for stubborn substances such as tar, wax, gum, grease, or reaching second-story
surfaces, paint removal and oil stains. Please use caution when using this high-pressure tip. To
test the high force of the 0° tip, it is recommended to start washing at a distance and gradually
focus in on the object you intend to clean, reducing the possibility of causing damage.
07mf2_POWERPLAY MANUAL_EN_11614.indd 11
SPRAY TIPS
8 - English
13/06/12 2:53 PM