Olympus CAMEDIA FlashPath MAFP-1E Mode D'emploi page 38

38
E
INSTALLING THE SOFTWARE (Windows 3.1)
To install the provided software when using Windows 3.1
1 Turn the computer and start up Windows 3.1.
2 Insert the Driver Setup Diskette (FPD-2E) in the FDD.
3 In the Program Manager, select [Icons], then [Run]. Enter
"a:\setup16.exe" and click the OK button.
4 When the Setup window appears, follow the on-screen
instructions to install your software.
5 When installation is complete, a dialog box appears asking
whether or not to restart your computer.
6 Restart the computer to initialize the installed software.
CAUTION
If you specify the software installation destination
directory name using 2-byte characters such as
Chinese or Japanese letters when installing software
in your computer, the operation after installation may
be abnormal at times. To prevent this, be sure to use
1-byte characters in the installation destination
directory name.
The computer must be restarted before you can
use your software
If your FDD is not drive A, check the FDD drive
and execute "Setup16.exe" from that drive.
Read the latest information on your software in
the "README.TXT" file stored on the floppy disk.
"Setup.exe" is the setup program for Windows 95.
Do not run this program.