Table des Matières
Publicité
36
E
INSTALLING THE SOFTWARE (Windows 95)
To install the provided software when using Windows 95.
1 Turn on the computer and start up Windows 95.
2 Insert the Device Driver Setup Diskette (FPD-2E) in the
FDD.
3 Click the Windows 95 [Start] button.
4 Select [Run], enter "a:\setup" in the dialog box and click
the OK button.
5 When the Setup window appears, follow the on-screen
instructions to install your software.
6 The following window appears when the installation is
complete.
7 Restart the PC to initialize the installed software.
CAUTION
The computer must be restarted before you can
use your software.
If your FDD is not drive A, check the FDD drive
and execute "Setup.exe" from that drive.
Read the latest information on your software in
the "README.TXT" file stored on the floppy disk.
Publicité
Table des Matières
