Regulators - Bentone BG 450 Instructions De Montage Et D'entretien

12. Regulators

The burner must be connected to an external regulator. There are two
options in the electrical box for interconnection to the regulator. The preferred
type of regulator can be easily connected here.
Three variants of regulator for installation directly on the burner are available.
• JUMO 316 With three position signal: up signal, no signal and down
signal.
• Siemens RWF50.2 With three position signal: up signal, no signal and
down signal.
• Siemens RWF50.3 With analogue signal 4-20 mA. LMV37 uses 4–20
mA.
For information and operation of the different regulators which can be
installed directly on the burner, see the enclosed manual.
When connecting an external regulator of a type other than those which
are installed on burners, see the manufacturer's recommendations and the
wiring diagram for burners.
48
Bentone
172 617 58 2018-08-10