Olympus CAMEDIA C-1400L Mode D'emploi page 68

68
E
6
Press the Power button to turn it off.
● The picture data remains in the SmartMedia card even
after the power is turned off or the batteries are replaced.
Do not open the Card compartment cover, remove the
batteries or unplug the AC adaptor while the Card access
lamp is blinking.
Note:
◆ When the batteries run out while taking pictures,
the power may turn off. If the
and the frame number blink, the picture just
taken was not recorded properly. Replace the
batteries and take the picture again.
◆ The LCD monitor cannot be used as a viewfinder.
◆ While the picture just taken is being displayed on
the LCD monitor and the Green lamp is blinking,
the picture is being recorded and the next
picture cannot be taken.
◆ See page 78 for setting the Selftimer. See page
110 for adjusting the exposure.
◆ The image size of a print is bigger than what you
see in the viewfinder or on the LCD monitor.
lights or both