Main Unit - Rear; Controls And Functions; Main Unit - Front - SYNQ CDX.2 Mode D'emploi

ENGLISH
 In order to prevent electric shock, do not open the top cover. If a problem occurs, contact
your dealer.
 Do not place metal objects or spill liquid inside the CD player. Electric shock or
malfunction may result.
 This CD player uses the semiconductor laser. To allow you to enjoy music at a stable
operation, it is recommended to use this in a room of 5°C – 35°C.
 The compact disc player should not be adjusted or repaired by anyone except properly
qualified service personnel.
 This unit may cause interference to radio and television reception.
CLEANING THE CD-PLAYER:
Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside
the unit. Do not use volatile liquids such as benzene or thinner which will damage the unit.
CONNECTIONS
 Connect the mini-DIN cable between the control unit and the main unit (CD loader).
 Use the supplied cinch cables to connect the audio outputs of the CD player with the CD
inputs of your mixing unit.
 Also connect the 2 fader start cables if your audio mixer has fader start connections.
(Synq® or Pioneer® compatible)
 Connect the mains cable.

CONTROLS AND FUNCTIONS

MAIN UNIT - FRONT:

3
1. Power (Power ON/OFF switch): When the power switch is pressed, the power turns
on and the blue led is lit.
2. Disc tray: Use the OPEN/CLOSE buttons to open disc tray and put the CD in place.
3. OPEN/CLOSE button: press this button to open and close the disc tray. These
buttons are disabled during playback. If the tray is not closed after 60sec. It will close
automatically to prevent damage.
SYNQ® 3/87
USER MANUAL
1 3 2
CDX-2
ENGLISH

MAIN UNIT - REAR:

6 5
4. Control connector: use the supplied mini-DIN cable to connect this output to the
control unit.
5. Audio outputs: Output for the audio signals from each player. Use the supplied
cinch/cinch cables to connect these outputs to the CD/line inputs of your mixing unit.
6. Digital out socket: Use this connector to connect the digital signal (S/PDIF format) to
the input of a digital amplifier or digital recorder (ex. Mini disc)
7. Mains input: connect the CD player to the 230V AC mains, using the supplied power-
cord.
CONTROL UNIT - FRONT:
23 24
11 12 13 14 15 16 17 18 19 20 21 22
1 2 3 4 5 6 7 8 9 10
1. SEARCH WHEEL (OUTER RING): This wheel has 4 forward and 4 backward speed
positions for searching through songs. The more you turn the wheel in either direction
the faster you will search through the music.
2. JOG WHEEL (INNER RING): This jog wheel serves 3 functions depending on the
mode you are working in.
 The jog wheel acts as a slow frame search (1/75sec) control when the CD is not
playing but either paused or set to a cue point. To set a new cue point, spin the
wheel then press PLAY or LOOP IN when you have determined the proper position.
Press CUE to return to the "CUE POINT".
 If the track is playing, the jog wheel temporarily bends the pitch of the music up to
+/-10% by rotating the wheel clockwise to speed it up or counterclockwise to slow it
down. The amount of pitch change is determined by the speed of rotation.
 When the loop cut/extend function is selected, every tick in counterclockwise
direction cuts the loop in half. Every tick in clockwise direction doubles the loop
length.
SYNQ® 4/87
USER MANUAL
7 4 6 5
CDX-2