Features And Operation; Positioning And Installation - ATI SOL-GP Manuel D'instructions

Handle the shower gently and protect it from bumps and falls.
The shower must only be used as described in this manual. The manufacturer cannot be
held responsible for damage caused by improper use.
Give these instructions to the user. The user must keep this documentation in order to have it
available for any further consultation. Should the product be sold or transferred to another owner,
always make sure that the booklet accompanies the product, so that it can be consulted by the new
owner.
The technical data plate (FIG-1-2) is placed on the side of the shower. It contains the serial number
and the year of manufacture, which are required to request spare parts or to report technical
problems to the manufacturer.

FEATURES AND OPERATION

2.
Operation (FIG-2-1): the purpose of this product is to heat the domestic hot water by solar radiation.
The incoming cold water (1) heats up due to solar radiation, stratifying inside the tank according to
increasing upwards temperatures.
The water mixer (2) determines the quantity of cold water that will be mixed with hot water just before
the mixed water outlet point (3)
The foot wash tap (4) only supplies cold water
Main parts (FIG-2-2):
A. tank in AISI 316 stainless steel
B. fixing base
C. mixer
Technical data :
dimensions (FIG-2-3) ................................ mm 2178 x 367 x190
capacity ...................................................... 28 L
weight ........................................................ empty :12 kg - full : 40 kg
inlet pressure ............................................. min 100 kpa - max 300 kpa
cold water inlet connection ......................... ½" M
Mod.
final treatment

POSITIONING AND INSTALLATION

3.
With the exception of the shower-head to assemble, the shower is ready to be installed and requires
no assembly operations.
It is recommended to install the shower on a solid surface to ensure its stability and safety.
SOL-GP
Shot peening plus electropolishing
The micro shot peening prolongs the
useful life of the shower by means of
a mechanical micro-deformation
process.
The subsequent
increases the resistance to corrosion,
better surface asepticity and easier
maintenance
Pag. 9 / 32
D. foot washer tap
E. shower head
F. cold water inlet
SOL-GN
Two-coat painting
1st coat: thermosetting powder based
on
formulated with special anticorrosive
pigments
electropolishing protection)
2nd
excellent resistance to light and heat
ENGLISH
epoxy and polyester
(improves anticorrosive
coat: polyester
210-0275 – edizione 2021-04
resins,
resin with