Accessing The Unit; Opening The Container; Hinging The Screen Holder Up/Down; Installation And Connection - Oase BioTec ScreenMatic2 18000 Notice D'emploi

Masquer les pouces Voir aussi pour BioTec ScreenMatic2 18000:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

- EN -
2.5

Accessing the unit

• Remove the container cover: Access to the control device.
• Hinge up the screen holder: Access to the foam filters, substrate tubes, separating plate and outlet.
2.5.1

Opening the container

 E
• BioTec ScreenMatic² 18000/24000: Release the locking clips, lift up the cover and remove.
• BioTec ScreenMatic² 38000: Lift the cover using the handles and remove.
– Screw the handles onto the cover. The handles are not fitted on delivery.
N O T E
Only operate the unit with the container cover in place.
2.5.2

Hinging the screen holder up/down

How to proceed:
 F
To hinge up/open
1. Remove the debris tray.
2. Hinge up the distributor extension.
3. Hinge up the screen holder with the ScreenMatic rotating screen unit.
To hinge down/close
4. Carefully hinge down the screen holder.
5. Push the distribution extension down until it audibly engages.
6. Replace the debris tray.
3

Installation and connection

3.1

Installation planning

N O T E
Use suitable transport and lifting aids to transport and install the unit.
The unit weighs more than 25 kg. (→ Technical data)
3.1.1

Optimum ambient and operating conditions

Optimum operating results can be obtained with careful planning, taking the ambient conditions into account.
• As the filter is very heavy when filled, it must be placed on a suitable base (at least on slabs, but preferably
on a poured concrete base) to prevent it from subsiding.
• Align the base slab horizontally.
• Ensure sufficient room for movement for carrying out cleaning and maintenance work.
• Allow the dirty water to drain out into a drain or far enough away from the pond to ensure that it cannot flow
back into the pond.
• Do not position the inlet into the pond higher than the outlet of the filter system (e.g. above a water course or
waterfall).
N O T E
A water course or waterfall guarantees optimum water return to the pond.
In this way, the filtered pond water is enriched with oxygen before it is returned to the pond.
16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Biotec screenmatic2 24000Biotec screenmatic2 38000

Table des Matières