Ego Power+ CS1600 Manuel De L'opérateur page 27

To Start the Chain Saw (Fig. 11)
1. Install the battery pack.
2. Make sure no objects or
obstructions are in the immediate
vicinity which could come in contact
with the bar and chain.
3. Pull the chain kickback brake
handle towards the front handle to
the operating position (Fig. 6).
4. Grasp the front and rear handles firmly, using both hands.
5. Press and hold the lock-off button with the thumb of your right hand, then squeeze
the trigger switch with the fingers of your right hand to start the saw. Release the
lock-off button and continue to squeeze the trigger for continued operation.
WARNING:
To Stop the Chain Saw
1. Move the chain saw away from cutting area, and then release the trigger switch
to stop the chain saw.
2. Push the chain kickback brake handle forward to the brake position to engage the
chain brake (Fig. 6).
WARNING:
breaks and after finishing work.
Do not attempt to start the saw when the saw chain is in a cut.
Always remove the battery pack from the chain saw during work
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1600
11
Lock-off Button
Trigger Switch
27