Replacing The Wheels - Ego Power+ LM2020SP Guide D'utilisation

REPLACING THE WHEELS

(Fig. 32a, 32b & 32c)
WARNING:
the battery pack when servicing or
transporting the mower.
1. Turn the mower on its side with the
upper surface against a wall.
2. Use a flat blade screwdriver to pry
the dust cover away from the wheel.
3. Use an adjustable or 1/2 inch
(13mm) wrench to turn the bolt
counterclockwise to loosen it.
4. Remove the bolt, the worn wheel
and the washer(s) from the wheel
axle.
NOTICE:
◾
When replacing the rear wheel
for the self propelled mower
(LM2020SP/LM2020SP-FC), remove
the drive gear from the worn wheel
and assemble it to the new wheel
with the 3 screws.
56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC
Always remove
32a
Front Wheel
Front wheel for
LM2020SP/
LM2020SP-FC/
LM2020/
LM2020-FC
32b
Bolt
Rear Wheel
Rear wheel for
LM2020SP/
LM2020SP-FC
32c
Bolt
Rear Wheel
Wave Washer
Rear wheel for
LM2020/
LM2020-FC
Dust Cover
Bolt
Round Recess
facing outside
Wave Washer
Plain Washer
Wheel Axle
Dust Cover
Round Recess
facing outside
Drive Gear
Screw
Wave Washer
Wheel Axle
Dust Cover
Round Recess
facing outside
Wheel Axle
41