Maintenance; Cleaning The Mower; Removing The Blade - Ego Power+ LM2020SP Guide D'utilisation

MAINTENANCE

WARNING:
from the mower before cleaning or performing any maintenance.
WARNING:
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.

CLEANING THE MOWER

WARNING:
mower.
The underside of mower deck should be cleaned after each use, as grass clippings,
leaves, dirt and other debris will accumulate. This accumulation is undesirable, as it will
promote rust and corrosion.
Remove any build-up of grass and leaves on or around the drive shaft (LM2020SP/
LM2020SP-FC only) and motor fan (do not use water). Wipe the mower clean with a
damp cloth.

REMOVING THE BLADE

WARNING:
the cutting edges with rags or other materials when performing any maintenance on
the mower blade. Always remove the battery pack when servicing or transporting the
mower.
NOTICE:
The following tools are required for replacing the blade:
◾
9/16'' (14mm) wrench
◾
Torque wrench
◾
Manual screwdriver or metal rod with a diameter of
5/16'' (8mm)
◾
Manual screwdriver or metal rod with a diameter of 1/4'' (6.35mm) or less.
1. Stop the motor; remove the battery pack from the mower.
2. Turn the mower on its side.
34
56-VOLT LITHIUM-ION CORDLESS MOWER — LM2020SP/LM2020SP-FC/LM2020/LM2020-FC
To avoid serious personal injury, always remove the battery pack
When servicing, use only identical replacement parts. Use of any
Always remove the battery pack when servicing or transporting the
Always protect your hands by wearing heavy gloves or wrapping