Aux In Operation; Sleep Operation - Daewoo International DCR-300 Manuel D'instructions

NOTE:
• If the signal strength is weak, your Bluetooth receiver may disconnect, but it will
re-enter pairing mode automatically.
• For a better signal reception, remove the obstacles between the unit and the
Bluetooth device.
• This unit supports A2DP (Advanced Audio Distribution Pro le) and AVRCP (Audio
Video Remote Control Pro le) functions. This can only be paired with one Bluetooth
device at one time.
• Compatibility with all devices and media types is not guaranteed.
• Some mobile phones with the Bluetooth function may connect and disconnect as
you make and end calls. This is not an indication of a problem with your unit.

AUX IN OPERATION

You can play other music sources (iPod, MP3 or other digital audio players) through the
speakers of the DCR-300 by connecting the AUX IN JACK (#8) to your external player's
audio out jack or headphone jack.
1. Plug one end of an audio cable (not included) into the AUX IN JACK (#8) and the
other end of the cable to the headphone jack of your digital audio player.
2. Tap MODE BUTTON (#2) repeatedly to select AUX mode.
3. AUX will show on the LED Display.
4.Turn on and start playing the external device you plugged into the AUX IN JACK
(#8).
5. Slowly adjust both the volume controls of your DCR-300 and the external device
until you reach a comfortable listening level.
Notes:
• If you connect the DCR-300 to the Line-Out Jack of your external device, you only
need to adjust the volume control of your DCR-300. If you connect to the Headphone
Jack of your external device, you may need to adjust both the volume controls of
your external device and the DCR-300 to obtain the desirable listening level.
• Remember to turn o the DCR-300 when you have nished listening. Don't forget to
switch o the power of your external audio device as well.

SLEEP OPERATION

The sleep timer allows the unit turn o automatically after a designated time has
elapsed.
1. Tap the SNOOZE/SLEEP BUTTON (#18) to enter sleep mode.
2. Repeatedly tap the SNOOZE/SLEEP BUTTON (#18)to select the sleep timer 120 – 90
– 80 - 70 – 60 – 50 - 40 – 30 – 20 – 10 – 5 - OFF (in minutes). The unit will play for the
selected length of time then turn o automatically.
3. To cancel the sleep timer, repeatedly tap the SNOOZE / SLEEP BUTTON (#18) until
the timer shows OFF.
4. To turn the unit "O " before the selected length of time, press and hold the
BUTTON (#1) at any time.
EN
19