Removing The Front Bezel; Licensing The Avigilon Control Center - Avigilon 2.5TB-HD-NVR Guide D'installation

1. Slide the right end of the bezel against the right hinge of the
server.
2. Push the left end of the bezel against the server until it
clicks into place.
3. Use the provided key to lock the bezel.
Release
Latch
Bezel Lock

Removing the Front Bezel

The bezel must be removed before you can access the power
button, hard drives, and DVD drive.
1. Unlock the bezel.
2. Pull the release latch beside the bezel lock, then carefully
pull the bezel away from the server.

Licensing the Avigilon Control Center

Once the server has been installed, you need to activate the
license for the Avigilon Control Center Server software before it can
be used to coordinate your high definition surveillance system.
NOTE: If the Control Center Server software was not preinstalled,
insert the installation DVD and install the software.
1. Log in to Windows.
The default username is
2. Open the Admin Tool:
with no password.
Administrator
5