Assigning An Ip Address - Avigilon 2.5TB-HD-NVR Guide D'installation

16.When the Activation Succeeded message appears, click
Finish.

Assigning an IP Address

Once the Avigilon Control Center Server has been licensed, you
can assign an IP address to the server. The server obtains an IP
address automatically by default, but you can configure the server
to use a static IP address.
1. In Windows, select Start > Control Panel > Network
Connections.
2. Right-click a network connection and select Properties.
3. In the Local Area Connection Properties dialog box, select
Internet Protocol (TCP/IP) then click Properties.
4. In the Internet Protocol (TCP/IP) Properties dialog box, you
can allow the server to obtain an IP address automatically,
or you can choose to assign a static IP address:
a. Select Use the following IP address: then assign an
IP address, a Subnet mask, and a Default gateway.
b. Enter the Preferred DNS server address and an
Alternate DNS server address.
c. Click OK.
5. Click OK to close the Local Area Connection Properties
dialog box.
8