Avigilon 2.5TB-HD-NVR Guide D'installation page 16

Connector 0 and Connector 1 give you access to different
hard drives.
3. In the workspace, locate the hard drive you want to replace.
To help you locate the hard drive, select Blink in the
Available Tasks drop down list then click Execute. The LED
indicators on the selected hard drive will start blinking.
Select Unblink and click Execute to have it stop.
4. For the hard drive you want to replace, select Offline from
the Available Tasks drop down list and click Execute. The
hard drive will be disconnected from the server for removal.
a. When the Confirmation page appears, click Offline.
b. When the Confirmation dialog box appears, click OK.
The hard drive is listed as Offline in the Server
Administrator, and the physical hard drive starts blinking.
5. Press the release button on the front left of the hard drive.
When the handle is released, pull the hard drive out of the
server.
12