Avigilon 2.5TB-HD-NVR Guide D'installation page 17

6. Remove the screws from the side of the hard drive carrier to
remove the hard drive.
7. Install a new hard drive into the hard drive carrier then re-
attach the screws. The hard drive connectors should face
the back.
8. When the hard drive is secured in the carrier, insert the
hard drive back into the server.
9. Once the hard drive is inserted all the way in, push the
handle against the hard drive to lock it into place.
The server immediately starts rebuilding the hard drive. The
progress is displayed in the Server Administrator.
When the hard drive comes online, normal operations can be
resumed.
13