General Power Tool Safety Warnings - Cub Cadet GasLess ELITE Trimmer CCE400 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GENERAL POWER TOOL SAFETY WARNINGS

GENERAL POWER TOOL SAFETY
WARNINGS
WARNING:
warnings and all instructions. Failure
to follow the warnings and instructions
may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
General Power Tool Safety
Warnings – Work Area Safety
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the liquids,
fumes or dust.
Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
General Power Tool Safety
Warnings – Electrical Safety
Charger plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with
earthed (grounded) chargers.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electrical
shock if your body is earthed or grounded.
Read all safety
Do not expose power tools, chargers
or Power Cells to rain or wet
conditions. Water entering the tool,
chargers or Power Cells will increase
the risk of electric shock.
Do not abuse the cord. Never use the
power cord for carrying, pulling or
unplugging the charger. Keep the
power cord away from heat, oil, sharp
edges, and moving parts. Damaged or
entangled cords increase the risk of
electric shock.
When operating a charger outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
If operating a charger in a damp
location is unavoidable, use a
residual current device (RCD)
protected supply. An RCD is also
known as a ground fault circuit
interrupter (GFCI) or earth leakage
circuit breaker (ELCB). Use of an RCD
reduces the risk of electric shock.
General Power Tool Safety
Warnings – Personal Safety
Stay alert, be aware of your
surroundings, watch what you are
doing and use common sense when
operating a power tool. Do not use a
power tool while you are tired or
under the influence of drugs, alcohol,
or medication. A moment of inattention
while operating a power tool may result
in serious personal injury.
5

Publicité

Table des Matières
loading

Table des Matières