Unfolding Steps - e-TWOW BOOSTER PLUS Mode D'emploi

(a)
(e)

Unfolding steps

1. Press the rear brake fender in the direction of the arrow, as shown in figure
(h), until the folding hook is released from the opening located on the rear
brake. Then, lift the handlebar until it reaches the normal position and the
locking bolt comes into place, like in figure (i).
2. Raise the two handles of the handlebar until they automatically return to the
normal position, figure A.
3. Push the lock lever like is shown in figure (a) and (b) and lift the handlebars
to the desired height. Now press the button shown in figure (c) and secure it
in one of the two holes, as desired. Then close the lock lever and make sure
that you always keep the lever secured and tightly closed.
(b)
(f)
(h)
7
(c)
(i)
(d)
(g)
ELECTRIC TWO WHEELS
A NEW ERA IN URBAN MOBILITY