d. Horn
If you turn on the power, when pressing the horn button, it will honk.
e. LED headlight
In manual mode: Press the ON/OFF Light button when needed and there
will be a sign in display indicates the light is turn on. Press the button again
when you do not need the light. Keep pressed for a few seconds.
The scooter is equipped with a sensor light that detects the need of light.
The light will turn on automatically (auto light mode) if the sensor detects
poor ambient light.
For example: when is cloudy weather and the auto light mode is on, the light
turns on. If the daylight is proper, the auto light mode detects the light and
the headlights will go off after 5 seconds.
On auto light mode, the display is also lighted depending on the ambient light.
If the scooter is on auto light mode, you can go to manual mode by pushing
the ON/OFF Light Button until the sign "Auto" disappears from the screen.
When the ON/OFF light button is turned off, it will stop the front light and,
also the rear stop light. In this situation, the stop light will turn on only when
the brakes are used.
f.
Mileage Show
When the display is powered, it displays 2 modes: total and trip. You can
change it by pressing the settings button. In 'trip' mode, press the setting
button (S) for 3 seconds and it will clear the trip.
g. Emergency braking
In case you need fast braking, it's recommended to use the foot brake.
3. Display factory settings
1
3
6
1. Headlight icon
2. Speed
2
3. Battery
4. Temperature
5. Displays the total or trip
distance
4
6. Trip total (ODO) or total
mileage from the last reset
5
(TRIP)
9
ELECTRIC TWO WHEELS
A NEW ERA IN URBAN MOBILITY