Riding Operation; Getting Ready; Start; Brake - e-TWOW BOOSTER PLUS Mode D'emploi

more than 400 ms) - this error clears when starting the communication.
E3 – Overvoltage error (Battery voltage higher) – this error clears if you put back
the original battery.
Battery saving mode
This setting is automatically activated and limits the maximum speed of the
scooter to 15 km/h if the battery level drops below 30%.

Getting ready!

1. Choose a suitable venue for riding.
2. Unfold the scooter in accordance with the instructions.
3. Adjust the handle bar to the suitable height according to your stature.

Start

1. Press the power button to turn on the power.
2. Stand with one foot on the scooter and leave another foot on the ground.
3. Gently press down on the right thumb accelerator, the scooter will
immediately move forward slowly. Place the foot which is on the ground on
the scooter. With your right thumb press the right thumb accelerator. The
bigger the pressure, the faster it will go.

Brake

1. Electromagnetic brake - pressing the left thumb electronic magnetic brake
will activate the electromagnetic brake, which will power off the scooter and
apply the brake. The more you press, the greater the braking force will be.
2. Mechanic brake – E-TWOW also has a mechanic brake, which is activated
by pressing with the foot on the rear fender. This also activates a sensor
that stops the front wheel motor.
scooter while on cruise control, it doesn't turn off permanently the cruise
control option.
Cruise control - P2
This option allows the user to set and maintain a constant speed, without keeping
the acceleration lever pressed.
Press the acceleration right thumb and keep the same speed for 5 seconds and
the cruise control will automatically begin. Then you can release the acceleration
lever, and the scooter will continue cruising with the same speed. You can switch
the function off easily as well, by pressing the brake or acceleration lever gently.
The cruise control function is not activated by default, you need to activate it after
the purchase of the scooter. This function can be activated or deactivated from the
central control unit, according to the user's needs.
If you want to stop the scooter while this function is activated,
thumb electric brake, not mechanic brake.

RIDING OPERATION

The mechanic brake temporary stops the
11
please use just the
ELECTRIC TWO WHEELS
A NEW ERA IN URBAN MOBILITY