Intended Use; Environmental Protection; Symbols On The Device; Accessories And Spare Parts - Kärcher LBL 2 Battery Mode D'emploi

Intended use

WARNING
Risk of injury from flying particles
Use the leaf blower only when this does not endanger
other persons in the vicinity.
The device is intended for blowing leaf litter, grass clip-
pings, hedge clipping and loose dirt lying on the ground.
Only use the device in private households.
Foreseeable misuse
Any type of improper use is prohibited.
The operating personnel are liable for damage resulting
from incorrect use.

Environmental protection

The packing materials can be recycled. Please
dispose of packaging in accordance with the en-
vironmental regulations.
Electrical and electronic appliances contain valu-
able, recyclable materials and often components
such as batteries, rechargeable batteries or oil,
which - if handled or disposed of incorrectly - can
pose a potential threat to human health and the environ-
ment. However, these components are required for the
correct operation of the appliance. Appliances marked
by this symbol are not allowed to be disposed of togeth-
er with the household rubbish.
Notes on the content materials (REACH)
Current information on content materials can be found
at: www.kaercher.com/REACH

Symbols on the device

Leaf blower LBL 2 / LBL 4
Warning of flying objects.
Keep other persons away from the work
area.
Wear suitable hearing protection and
safety goggles when operating the de-
vice.
Protect the device from rain and spray
water.

Accessories and spare parts

Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the
packaging. Check the contents for completeness when
10
unpacking. If any accessories are missing or in the event
of any shipping damage, please notify your dealer.

Device description

Illustration A
Flat nozzle with integrated scraper edge
1
Blower tube lower section
2
Blower tube upper section
3
Air outlet
4
Power switch
5
18 V: On/Off
36 V: Off, Level 1, Level 2
Battery pack unlocking button
6
Type plate
7
Mount for Battery Power battery pack (+)
8
Air intake opening
9
* Battery Power 36/25 battery pack
10
* Battery Power 36 V Quick Charger
11
* Battery Power 18 V Standard Charger
12
* Battery Power 18/25 battery pack
13
* Already included in the scope of delivery of the set var-
iants.

Blower pipe installation

1. Plug the blower tube lower section onto the blower
tube upper section.
Illustration C
2. Turn the blower tube clockwise to lock in position
(bayonet lock).
Illustration D
Turn the blower tube anticlockwise to unlock and re-
move.

Flat nozzle installation

1. Plug the flat nozzle onto the blower tube lower sec-
tion.
Illustration B
Inserting the battery pack
ATTENTION
Dirty contacts
Damage to the device and battery
Check the battery mount and the contacts for soiling
and clean them as necessary before inserting the bat-
tery.
Illustration E
1. Push the battery into the mounting in the device until
it audibly latches into place.
Removing the battery
WARNING
Uncontrolled startup
Risk of injury
Remove the battery pack from the device during work
breaks and before carrying out any service or care work.
Illustration F
1. Press the unlocking button.
2. Remove the battery from the device.
English

Initial startup