Waeco ASC 6100G Manuel D'utilisation page 29

R1234 from system
Total
g.
STOP-EXIT
R1234yf from system indicates how many grams of refrigerant have been extracted from air conditioning
systems using the menu item Short selection or Free selection since the last reset (see date).
R1234 from tank
Total
g.
STOP-EXIT
R1234yf from tank indicates how many grams of refrigerant were added to the A/C service unit using the
menu item Int. vessel filling since the last reset (see date).
R1234 to system
Total
g.
STOP-EXIT
R1234yf to system indicates how many grams of refrigerant have been added to the air conditioning sys-
tems using the menu item Short selection or Free selection since the last reset (see date).
Vacuum time
Total
min.
STOP-EXIT
Vacuum time indicates how long the vacuum pump has operated since the last reset (see date).
Service completed:
Number
STOP-EXIT
Service completed displays the amount of service work performed using the A/C service unit since the
last reset (see date).
14.7 Updating the software via USB flash drive
The software is updated using a USB flash drive. The USB flash drive must be formatted with the FAT32 file sys-
tem.
When updating the software, the following data is stored in the internal memory of the A/C service unit:
• The current software of the A/C service unit
• The current database with all the common vehicle types and corresponding filling quantities
You can update the software and the database separately.
1. Copy the current software to the USB flash drive.
2.
Insert the USB flash drive into the USB port.
07/03/17
1455
07/03/17
3395
07/03/17
1200
07/03/17
79
07/03/17
4
English
27