Adjustment - GCE proFIT 60010 Mode D'emploi

2.4 MaCHInE CUTTInG RanGE

adjustment

cutting torch vertical movement adjustment:
75mm. distance of cutting torch center from the
edge of body:
•
from 40 mm to 170 mm, with one cutting torch
•
from 40 mm to 345 mm, with extension kit for
two cutting torches
circle cutting pole adjustment:
•
from 40 mm to 670 mm, with one cutting torch
•
from 40 mm to 840 mm, with extension for two
cutting torches
distance between cutting torches in case of
extension is used:
•
60 mm, with two cutting torches next to each
other at the same side
•
485 mm, with two cutting torches opposite to
each other
circle cutting dimensions:
•
Ø80 mm – Ø1340 mm, with one cutting torch
•
Ø80 mm – Ø1680 mm, with extension for two cutting torches
by adding a circle pole extension piece and second circle pole:
•
For one cutting torch: from 40 mm to1170 mm (Ø 80 – Ø 2340 mm)
•
For two cutting torches: from 40 mm to 1340 mm (Ø 80 – Ø 2680 mm)
2.5 CUTTInG noZZLES
Fig.3: GCE proFIT
Fig.4: GCE proFIT
7/222
®
with one cutting torch
®
with two cutting torches
GB