Klarstein SECRET SERVICE Mode D'emploi page 26

EN
26
6. Fix the coner braces accessory with 8pcs M4*12 mm big flat screws on the
hood, the 8 pcs of M4*12 screws and M4 nut with gasket will be used to fix the
hood into the hanging board.
Attaching the corner
brackets
7. There can ajust the height of the angel iron by the adjustable screw. The
distance can be adjusted from 0 to 25 mm. Tighten the safety screw after
reaching the height which you need.
Safety srew
Adjustable screw