Ducati MULTISTRADA Instructions De Montage page 22

Take the RH bracket (8) and LH bracket (9) from the kit.
Position them so that the screw support plates (C) are
upward.
Install the 4 long screws (10) and spacers (11) into brackets
UK
(8) and (9) front holes, positioning them with the wider end
resting on the brackets.
Start screws (10) into the holes of screws (B), previously
removed.
Install the rubber blocks (14) taken from the kit on Top Case
support (12). Use suds to help insertion.
Set Top Case support (12) onto rear grab handle, ensuring
that holes match the ones available on grab handle and
brackets (8) and (9), previously installed.
22
11
10
14
C
8
fig. 14
14
12
fig. 15