Possible Causes - Smeg MFF01 Mode D'emploi

What To Do If......
Problem
The appliance does not
work
The appliance stops dur-
ing operation
The cycle does not start
The milk fails to froth
The ingredients do not
dissolve
Contact local technical support if the problem is not solved or in case of other types
of faults.
12 - EN
What To Do If.....

Possible causes

Plug not connected
The jug is empty
The jug was removed dur-
ing preparation.
Ingredients too thick or too
large like large chocolate
chips
The jug has not been fitted
The whisk has not been
fitted
Milk is not cold
The jug contains residual
water or is dirty
The whisk used is not cor-
rect
Use of already frothed or
heated milk
Use of low-fat milk
The ingredients are
too thick or
too much
Solution
Connect the plug
Fill the jug
Reposition the jug in the
specific site
Use finer ingredients
Place the jug in the appropri-
ate site.
Check that the whisk has
been installed and posi-
tioned properly.
Use cold milk
Make sure the jug is dry and
clean
Assemble the serrated whisk
Do not use milk that was
frothed or heated
Use the proper type of milk
Chop the ingredients before
inserting them or check the
preparation tips