User Manual
Introduction
Thank you for purchasing the 2 Port DisplayPort 1.2 Bi-directional switch This product has been designed
to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime
technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
The Lindy DisplayPort 1.2 bi-directional switch is a compact, effective solution for manually switching
between either two DisplayPort source devices, or two DisplayPort displays, depending on the desired
layout.
Package Contents
▪
2 Port DisplayPort Switch
▪
1m USB to DC Cable, Barrel Size: 3.5/1.35mm
▪
This manual
Features
▪
Input/Output: 3 x DisplayPort (Female)
▪
Bi-directional capability: switch between 2 source devices, or 2 connected displays
▪
Maximum Resolution: 3840x2160@60Hz 4:4:4 8bit
▪
Supports HDCP 1.4
▪
Simple push button for manual switching
Specification
▪
Housing Material: Plastic
▪
Colour: Black
▪
Operating Temperature: 0°C - 85°C (32°F - 185°F)
▪
Storage Temperature: -40°C - 85°C (-40°F - 185°F)
▪
Humidity: 5-95% RH (non-condensing)
Installation
Connect the cables from source devices and the displays before powering on any devices. Power on the
source device first, then power on the displays. Use the switch to select your desired channel.
The diagrams below indicate the two configurations of how the switch can be used.
Picture A shows the source connected to the switch. The switch can then alternate output between
Display 1 or Display 2.
Picture B shows 2 sources connected to the switch. The switch can then alternate which source is used
to output to Display.
English