Contact Information; System Description - 3M BE-10 Serie Directives D'utilisation

3
BE-10 Series Hoods
This respirator helps reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User
Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program
must be implemented meeting all the requirements of OSHA 1910.134, including training, fit testing and medical evaluation. In Canada,
CSA standard Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in
sickness or death. For proper use, see package instructions, supervisor, or call 3M PSD Technical Service in USA at 1-800-243-4630
and in Canada at 1-800-267-4414.
FOREWARD

Contact Information

Read all instructions and warnings before using. Keep these User Instructions for reference. If you have any questions regarding these products
contact 3M Technical Service.
In United States:
Website: www.3m.com/workersafety
Technical Service: 1-800-243-4630

System Description

3M™ Hoods BE-10 Series are loose fitting respirator inlet coverings. These hoods, when combined with an appropriate powered air purifying
respirator (PAPR) or supplied air system, and the appropriate breathing tube, form a complete respirator system.
The hoods feature a wide field of view visor and shoulder length inner and outer shrouds. The hood is held in place on the head by a sewn-in elastic
headband.
The BE-10 and BE-10L are made with Tychem® QC Fabric. The BE-10BR is made with a butyl rubber material with sealed seams. Refer to the air
regulating valve assembly or PAPR NIOSH Approval Labels for a list of approved components.
These hoods will accommodate limited facial hair provided the facial hair does not protrude past the neck area or contact the inner shroud.
NOTE: If this hood and respirator system will be used in emergency response, per 29 CFR1910.134 the hood and respirator system must be inspected
on a monthly basis.
W WARNING
In Canada:
Website: www.3M.ca/Safety
Technical Service: 1-800-267-4414
Fig. 1 3M™ Hood BE-10 Series
1
(English)
User Instructions
BE-10 Hoodw/TurboPAPR.eps