MSI Creator X299 Présentation Rapide page 65

▶ CPU Ratio [Auto]
Sets the CPU ratio that is used to determine CPU clock speed. This item can only be
changed if the processor supports this function.
▶ Numbers of CPU Cores of Group X [Auto] *
Sets the numbers of CPU cores as a group for running target CPU Turbo Ratio. This
item only appears when a CPU that support this function is installed.
▶ Adjusted CPU Frequency
Shows the adjusted CPU frequency. Read-only.
▶ Core 0~X XX of XX [Auto]*
Allows you to set the CPU ratios for different number of active cores. These items only
appear when a CPU that support this function is installed.
▶ CPU Ratio Offset When Running AVX [Auto]
Sets a offset value to lower the CPU core ratio. It could be helpful for heat dissipation
when running AVX instruction set. If set to Auto, BIOS will configure this setting
automatically. This item appears when the installed CPU supports this function.
▶ Ring Ratio [Auto]
Sets the ring ratio. The valid value range depends on the installed CPU.
▶ Adjusted Ring Frequency
Shows the adjusted Ring frequency. Read-only.
▶ Misc Setting*
Press Enter, + or - key to open or close the following 3 items related to CPU features.
▶ EIST [Enabled]*
Enables or disables the Enhanced Intel
[Enabled] Enables the EIST to adjust CPU voltage and core frequency
dynamically. It can decrease average power consumption and
average heat production.
[Disabled] Disables EIST.
▶ Intel Turbo Boost [Enabled]*
Enables or disables the Intel
CPU supports this function.
[Enabled] Enables this function to boost CPU performance automatically above
rated specifications when system request the highest performance
state.
[Disabled] Disables this function.
SpeedStep Technology.
®
Turbo Boost. This item appears when the installed
®
55
BIOS Setup